Center Height 146mm, BS-3 Universal Dividing Head
-
Price:
Negotiable
- minimum:
- Total supply:
-
Delivery term:
The date of payment from buyers deliver within days
-
seat:
Shandong
-
Validity to:
Long-term effective
-
Last update:
2017-11-23 07:06
-
Browse the number:
238
Company Profile
Songen Machinery Co., Ltd.By certification [File Integrity]
Contact:Mr. Sam Sun(Mr.)
Email:
Telephone:
Phone:
Area:Shandong
Address:Shandong
Website: http://songenmachinery.yixingit.com/
Product Details
[1] Used for general dividings, gear and rack spindle cuttings, etc.;
[2] Designed for super hole 55.5mm diameter. End hole with Morse taper No. 6;
[3] Adjustable between the horizontal position (0 degree) to the vertical position (90 degrees);
[4] Shaft, spindle center, worm and gear are made of super steel heat treated and ground to high rigidity;
[5] Dovetail on tailstock strong enough to carry heavy loads and the degree can be adjusted in any direction;
[6] Ratio of worm and worm gear is 1: 40;
[7] Dividing plate is available for use as A and B faces. A face: 24, 25, 28, 30, 34, 37, 39, 41, 42, 43; B face: 46, 47, 49, 51, 53, 54, 57, 58, 59, 62, 66;
[8] The changeable gears are for 24, 28, 32, 38, 40, 44, 48, 56, 64, 72, 86 and 100;
[9] Center height of tailstock: Min. 38mm, Max. 165mm;
[10] Accessories
Standard Accessories:
Center, Carrier, Gear Bracket, Gear Set, Tailstock
Optional Accessories:
7" 3-Jaw Self-Center Chuck, One Set.
Flange plate, One pc
[2] Designed for super hole 55.5mm diameter. End hole with Morse taper No. 6;
[3] Adjustable between the horizontal position (0 degree) to the vertical position (90 degrees);
[4] Shaft, spindle center, worm and gear are made of super steel heat treated and ground to high rigidity;
[5] Dovetail on tailstock strong enough to carry heavy loads and the degree can be adjusted in any direction;
[6] Ratio of worm and worm gear is 1: 40;
[7] Dividing plate is available for use as A and B faces. A face: 24, 25, 28, 30, 34, 37, 39, 41, 42, 43; B face: 46, 47, 49, 51, 53, 54, 57, 58, 59, 62, 66;
[8] The changeable gears are for 24, 28, 32, 38, 40, 44, 48, 56, 64, 72, 86 and 100;
[9] Center height of tailstock: Min. 38mm, Max. 165mm;
[10] Accessories
Standard Accessories:
Center, Carrier, Gear Bracket, Gear Set, Tailstock
Optional Accessories:
7" 3-Jaw Self-Center Chuck, One Set.
Flange plate, One pc
- Air Clean Equipment
- Cleaning Machine
- Environment Protection Device
- Filtration Equipment & Parts
- Guide Rail
- Mass Transfer and Separation Equipment
- Pneumatic Component
- Washing Equipment
- Ball Screw
- Bearing
- Cutter & Tongs
- Fastener & Fitting
- Industrial Adhesive Products
- Lean Pipe & Pipe Rack System
- Pipe & Tube System
- Sealing & Gaskets
- Shaft
- Universal Hardware Parts